What’s Sealcoating?

What’s Sealcoating?

Uncategorized Comments Off

Asphalt pavement to keep it in easy terms is primarily stone and/or gravel and stone together with a binder.  The stone or aggregate is stored with this particular binder also called asphalt cement.  The binder is made in the distillation procedure of specific crude oils.  Maintaining this thing is critical in prolonging the corrosion of asphalt surfaces.  Rain, U.V. beams, and compounds since they’re introduced to the asphalt will irritate the binder and so start the degradation process of the asphalt and also will make a surface which turns brittle.  To decrease the effects of the components, it’s very important to employ a maintenance program which uses seal coating to prolong the life span of your parking lot or drive.

Sealcoating will offer a layer of security blocking the components of oils and water and U.V. harm.  Additionally, if applied to manufacturers’ specifications, sealcoating provides a slip resistant coating using a deep black finish that beautifies the parking lot or drive too.  Oxidation and water penetration will be the top causes of asphalt pavement collapse.  The sunlight’s ultraviolet rays break down the asphalt binder that holds the sidewalk together.  Moisture that’s permitted to enter cracks in sidewalk will erode the foundation, resulting in potholes and basic pavement breakup.  Moisture also penetrates the pores of the sidewalk causing additional erosion in addition to freeze-thaw harm.

Sealcoats are dollar general application generally bituminous based goods or acrylics.  The sealcoat is at a liquid formula of a few of the above mentioned emulsions blended with water, silica sand, polymer additives and other proprietary fillers and solids.  These goods may be applied by spray, brush or squeegee.  A regularly scheduled sealcoating app will more than double the life span of the asphalt saving you considerable dollars later on.  Rather than having to pay tens of thousands of bucks for new sidewalk, it’s more cost effective to invest just pennies on the dollar per square foot to keep.

When employing a sealcoating merchandise, follow the vital steps mentioned below to find the maximum protection and optimal functionality.  A minimum of 2 coats should be implemented.  Temperatures have to be a minimum of 50 levels and increasing for a period of less than 24 hours.  Don’t apply when temperatures are forecasted to get under the 50-degree mark.  In addition, do not use if rain is imminent in the exact same 24-hour interval.  Once completed with the use of sealcoat, allow to cure 24 hours prior to letting vehicle traffic back to the surface.

To outline, sealcoating every two to three years will surely extend the life span of your asphalt sidewalk for minimal price.  When implemented appropriately and in the ideal time, sealcoating prevents oxidation, sealcoating prevents weather harm and sealcoating beautifies pavement.

Back to Top

Skip to toolbar